Drywall Mounting Kit

Two Toggle Anchors, Two Screws

Comes with: Two toggle anchors and two matching screws
Weight: Each anchor has been tested with a 25 lb weight.
Installation: Measure out the distance of the holes on your rack and mark that onto the ceiling where you want the rack to hang. After drilling a 3/4 inch hole, insert the screw into the female half of the mounting hardware and then twist the tochle anchor onto the screw with the pointy half of the anchor facing up. Pinch the toggle anchor and push it slowly throgh the ceiling until the anchor snaps open. Then pull down and tighten your screw.

1. Drill a 3/4" diameter hole using a spade bit.
2. Spin the toggle anchor onto the screw so that when you pinch it, it closes onto the screw
3. Insert the toggle anchor into the drywall until the toggle anchor snaps back open.
4. Pull back on the female half of the mounting hardware so the toggle anchor grabs the ceiling and then tighten.

Shipping is available for a small flat fee across most of the US and Canada.

We do ship to other destinations so contact us for a quote if you don't reside in the options above.

Most orders ship within 4-6 business days.

Items are shipped without signature required so follow the tracking in your shipping confirmation email for the delivery date.

Read entire shipping policy

Read entire return policy